Undersea 2010

By Richard on July 18, 2010

I went back to the patch drawing I had sketched out for Undersea, back in 2008, just about two years ago in July.  Recently I scanned this into the computer. … Read More

Small Knob Panel Group

By Richard on July 18, 2010

I populated a section of one of my cabinets with all of the modules I’ve built using the small knob format.  From left to right: Mattson EG/VCA (2 modules) Mattson … Read More

CGS Dual CMOS Filters

By Richard on July 11, 2010

Quantity: 1 Ken Stone’s Dual CMOS filters, a.k.a. “Twin Wasp” VCF. Here’s a link to Ken’s CGS 49 PC Board. Continuing the squeeze-it-into-1U-with-small-knobs approach, I designed this Front Panel Express … Read More

Plague Birds

By Richard on July 5, 2010

Here’s an experimental patch to try out the new Dual Plague Bearer module.  I patched the triangle waves from two MOTM-300 VCOs into each of the two P.B. inputs.  The … Read More

Dual Plague Bearer

By Richard on July 5, 2010

Plague Bearer Quantity:  2 in 1U A pair of Flight of Harmony Plague Bearers, built into this small-format 5U panel: Dual Plague Bearer These are sold in a variety of … Read More

I like this Miniwave

By Richard on June 27, 2010

I rearranged modules in one of my cabinets today to create two voice groups.  Each group contains one of MOTM-300 VCO, CGS VCO, MOTM-440 VCF, MOTM-490 VCF, Resonant Low Pass … Read More

Partched Hat

By Richard on June 13, 2010

Another random selection of modules from the hat, five this time:  MOTM-650 MIDI converter, MOTM-490 VCF, CGS Bi-N-Tic Filter, CGS Serge VCS, Oakley ADSR-VCA.  Getting the 650 was good, as … Read More

Hat Chance X

By Richard on May 31, 2010

I made a comment on Muff’s about choosing modules for a patch from names tossed in a hat. People ran with it and started creating all sorts of crazy patches! … Read More

Mattson Envelope Generator/VCA

By Richard on May 30, 2010

Quantity: 2 Description: Mattson Mini-Modular Envelope Generator Mattson Mini-Modular VCA I combined the Mattson Envelope Generator and VCA modules into one panel.  Here is George Mattson’s description of the Envelope … Read More

Granulated Zero FM

By Richard on April 25, 2010

This patch uses all of the modules in the “West Coast” box described in the projects area.  One of my goals was to experiment with combining this simple box with … Read More