I built a 4ms RCD Breakout Kit. In my new case (previous post) I have more room for clocks, dividers and logic. I’ve had the 4ms Rotating Clock Divider for a while, but had to leave it configured in the way I used it most, which is Counting Up, Gate Mode, and 8 steps. The Breakout brings out six jumper selections to a panel. It’s one of the simplest kits.

I added a spacer and lockwasher behind the panel for the switches. Another addition was colored covers for the switches. I also added heat shrink over the wires soldered to the switches for mechanical strength.

And here’s a pic of the two together in the rack.