This panel is one of five that comprise a set of modules from CGS.  It contains three different functions: A group of four passive attenuator pots Two CGS 64 VCA … Read More

The CGS Serge panel had room for one small module, so I added this little mixer.   The simple design provides two attenuated inputs, plus a bias offset pot with a … Read More

A 1U Dual Mixer in matrix configuration This is a DIY mixer designed to save space in a portable cabinet.  It is based on my 2U DIY Matrix Mixer.  The … Read More

Quantity: 2 Description:  Mattson Mini-Modular Voltage Controlled Mixer Here is a MOTM-ized Mattson VC Mixer!  From the Mattson website: The VC Mixer consists of 4 channels. Each channel has an … Read More

I designed this module mainly for the purpose of increasing the resonance of the Cynthia/Buchla Quad Low Pass Gates.  There are quite a few low pass gates circuits around the … Read More

Quantity: 1 A stereo output mixer of my own design Front-Panel-Express MOTM style panel A simple 4-IN, 2-OUT matrix mixer. Inside are two identical 4-input mixers. Each input is sent … Read More

Quantity: 2 Description: My own DIY module with Front-Panel-Express MOTM style panel that combines a mixer with two attenuated inputs, a comparator, a bias pot and an inverter. See Mixer-Comparator … Read More

Quantity: 2 From the Oakley website: Up to three inputs, either CV or audio, can be summed or mixed together. Each control knob can be set so that the gain … Read More

Quantity: 0 From the Blacet website: The Blacet MX2040 Mixer/Processor is a DC-coupled mixer suitable for both audio and CV mixing. Each input is center-off with plus and minus phase … Read More