Quantisise Completed

By Richard on November 4, 2013

Finally!  Quantisise with Blue Panel and Furman PL-8C power conditioner all together in the 8U EWI Tour Case.  I upgraded the power strip from the Furman M-8Dx to get better … Read More

Blue Panel PC Boards

By Richard on October 25, 2013

Boards are all assembled for the Blue Panel.  Left to right: CGS113 Serge Wave Multipliers CGS65 Tube VCA/Timbral Gate x2 CGS67 Active Real Ring Modulator CGS81 Voltage Processor x5.5 2 … Read More

The Blue Panel

By Richard on October 19, 2013

This sits just to the right of Quantisise to provide some timbre enhancements, mixing, processing, and output capability, so that a performance might need to use only the one rack.  … Read More

Quantisise Six Rhizomatic VCOs

By Richard on October 16, 2013

First of three self-running postcard recordings made recently.  In this one all six VCOs are cross-connected in the manner of the Quantussy.  Outputs are direct from two of the six … Read More

Quantisise Operational

By Richard on October 4, 2013

Here it is, finally wired and mounted in its 8U high EWI Tour Case.  The Quantisise panel wasn’t designed to fit this case; it just happened to (and it’s tight).  … Read More

A Quantisise Solo

By Richard on October 4, 2013

Quantisise is all wired and fully operational!  Photos will follow.  Here is a recording I made, using a Quantussy emulation patch.  Five sections are chained as in the Cocoquantus, except … Read More

First Quantisise Recording

By Richard on September 29, 2013

A third of the Quantisise is assembled.  That’s two VCO sections.  Photos will be forthcoming after it’s all done.  I made this recording of it, patched with Cocoquantus.  Castle outputs … Read More

Quantisise LED Drivers

By Richard on September 21, 2013

Quantisise has four outputs per section (VCO, VCA and two S&H outputs).  Each is monitored by a different color LED, green for the VCO, yellow for the CV S&H, red … Read More