{"id":6854,"date":"2024-07-02T10:37:33","date_gmt":"2024-07-02T15:37:33","guid":{"rendered":"https:\/\/pugix.com\/synth\/?p=6854"},"modified":"2024-07-05T17:06:51","modified_gmt":"2024-07-05T22:06:51","slug":"four-new-quantussy-cells","status":"publish","type":"post","link":"https:\/\/pugix.com\/synth\/four-new-quantussy-cells\/","title":{"rendered":"Four new Quantussy Cells"},"content":{"rendered":"\n
\"\"
Four LFOs + eight S*H<\/figcaption><\/figure>\n\n\n\n

Two Dual LFO from VoiceAs<\/a> plus two Dual Sample and Hold modules from Tenderfoot Electronics<\/a> plus two Dual S&H from 2hp<\/a> make possible a four-cell Quantussy Cel<\/a>l ring.<\/p>\n\n\n\n

The 2^LFO from VoiceAs is a perfect LFO for application in a Quantussy Cell. Each LFO has a triangle and a square wave output, the triangle for sampling and the square for triggering, plus a rate CV input. I added the bananut colors I use (CV input – blue, output – black, pulse out – red), plus blue Davies knobs to the two LFO modules.<\/p>\n\n\n\n

The dual S&H from Tenderfoot is a new 4hp module with novel features. Each S&H has its own internal noise source. There’s an input attenuator pot, and a switch for S&H vs T&H. Also a trigger patched to the top S&H normals to the bottom S&H. So that one trigger can produce two simultaneous and different random voltages.<\/p>\n\n\n\n

Patching a four Quantussy Cell takes up every jack in this cluster of six modules.<\/p>\n\n\n\n

\"\"
Four Quantussy Cells patched<\/figcaption><\/figure>\n\n\n\n

This patch uses stack cables to provide patch points for taking out the square waves and four of the stepped samples.<\/p>\n\n\n\n

\"\"
Another view of the patch<\/figcaption><\/figure>\n\n\n\n

For a demonstration I made a patch consisting of four oscillators, four envelope generators, and four VCAs. Each oscillator pitch is controlled by a stepped output. Each oscillator is gate through an envelope generator\/VCA pair. I added delay and reverb effects.<\/p>\n\n\n\n

\"\"
The demo patch<\/figcaption><\/figure>\n\n\n\n