{"id":2439,"date":"2017-12-06T19:30:43","date_gmt":"2017-12-07T00:30:43","guid":{"rendered":"http:\/\/pugix.com\/synth\/?p=2439"},"modified":"2017-12-10T19:06:50","modified_gmt":"2017-12-11T00:06:50","slug":"make-noise-function-vs-wmd-ssf-mini-slew","status":"publish","type":"post","link":"https:\/\/pugix.com\/synth\/make-noise-function-vs-wmd-ssf-mini-slew\/","title":{"rendered":"Make Noise Function vs WMD SSF Mini Slew"},"content":{"rendered":"

\"\"<\/a><\/p>\n

I am nuts about voltage-controlled slewing modules, which all stem from the Serge Positive and Negative Slews, and the Dual Universal Slope Generator (DUSG).\u00a0 In Eurorack I have Make Noise Maths and Make Noise Function.\u00a0 Some contenders include the Befaco Rampage and the WMD SSF Mini Slew.\u00a0 I just received a Mini Slew and installed it next to the Function.\u00a0 They are both the same size (8 hp).\u00a0 Here’s my initial comparison.\u00a0 Rather than make feature lists, I’m going to compare by function.<\/p>\n

Inputs and Outputs<\/h4>\n

Both have an input for a signal to be slewed.\u00a0 The output will follow the input, but the rate of change going positive or negative (rise and fall) are controlled by the module.\u00a0 Outputs are handled differently on the two modules.\u00a0 Function has a positive output, corresponding to +Out on the Mini Slew.\u00a0 Function provides a full level inverted output as well.\u00a0 Mini Slew includes an internal balanced modulator (VCA\/Ring Mod) for processing the output.\u00a0 It’s called Variable Output.\u00a0 The Var Out knob acts like an attenuverter for this output.\u00a0 This is very handy for reducing the 8 volts output in cycle mode when you want to control a module without CV attenuation.\u00a0 Additionally, Variable Out has a CV input, so it can act as a VCA or Ring Modulator, depending on whether the CV is positive only (VCA) or swinging positive and negative.<\/p>\n

Triggering and Cycling<\/h4>\n

Both have a trigger input that works the same way on both modules.\u00a0 A positive trigger or gate will initiate one cycle of rise (to about +8 volts), followed by a fall back to zero.\u00a0 If a new trigger is received before zero volts is reached, the output begins rising again.<\/p>\n

Both have a cycle button with corresponding LED.\u00a0 However Mini Slew includes a cycle gate input, like Maths.\u00a0 Mini Slew remembers<\/em> the cycle button setting over powering the module off and on.\u00a0 Whereas Function always starts up cycling, which can be annoying.<\/p>\n

A known oddity of Function (and I think Maths, too) is that when cycling, a pulse is output on the signal input.\u00a0 Mini Slew doesn’t have this issue.<\/p>\n

EOR and EOC<\/h4>\n

End-Of-Rise and End-Of-Cycle pulses are available on both modules.\u00a0 As advertised, EOR goes high at the end of rise, i.e. at the start of fall, on both modules.\u00a0 Likewise EOC goes high at the end of a cycle on both.\u00a0 Both modules will cycle if EOC is patched to Trigger In.<\/p>\n

But the point at which these pulses are low<\/strong> differs in the two modules.<\/p>\n

On Function<\/h4>\n

EOR <\/strong>remains low <\/strong>when not cycling, goes high at the start of fall<\/strong>, and low at the end of fall<\/strong>.\u00a0 That is, EOR is high only during fall<\/strong>.<\/p>\n

EOC is <\/strong>exactly the inverse, low only during fall<\/strong>, sitting high when not cycling.<\/p>\n

On Mini Slew<\/h4>\n

EOR <\/strong>remains high<\/strong> when not cycling and goes low at the start of rise<\/strong>.\u00a0 That is, EOR is low only during rise<\/strong>.<\/p>\n

EOC <\/strong>is not the inverse of EOR.\u00a0 It goes low at the middle<\/strong> of rise, rather than at the start of fall.\u00a0 It goes high at end of fall and remains high when not cycling.<\/p>\n

So, on Mini Slew, both pulses are high when not cycling.\u00a0 EOR goes low first, at the start of rise, followed by EOC in the middle of rise.\u00a0 From the middle of rise to the start of fall, both pulses are low.\u00a0 Then in turn EOR goes high at end of rise and EOC goes high at end of fall.\u00a0 It’s more complicated than with Function.<\/p>\n

Rise and Fall CV<\/h4>\n

Both modules have rise and fall knobs and CV inputs.\u00a0 Function has a ‘Both’ CV input, which corresponds to the FM input on Mini Slew.\u00a0 ‘Both’ and FM CV increase the frequency with more positive CV, with an exponential response.\u00a0 (This is the 1V\/Oct CV input on the DUSG.)\u00a0 The response curves for Rise and Fall can be adjusted (more below).\u00a0 Mini Slew adds a CV Sum mode, toggled by a button.\u00a0 In this mode the Rise and Fall CV inputs are summed and applied to control both.<\/p>\n

Shape<\/h4>\n

The response curve is adjustable by a knob on either module from Log through Linear to Exponential.\u00a0 But Mini Slew goes farther. It has a switchable Time Compensation mode which greatly reduces the impact to the frequency\/rate as the Shape is changed. With this off the behavior is the same as on Function, i.e. turning more Exponential will also increase the frequency.\u00a0 Mini Slew adds CV over Shape, which Function doesn’t have.<\/p>\n

Hang<\/h4>\n

Function has a Hang input, which acts like a track\/hold.\u00a0 A high gate here will freeze the output, where it will remain until Hang goes low.\u00a0 Mini Slew doesn’t have this (nor does Maths).<\/p>\n

Audio Oscillation<\/h4>\n

Both modules can go into audio rates.\u00a0 I measured the maximum for Function is around 1.2K Hz, whereas Mini Slew can go up to about 620 Hz.\u00a0 This is with the rate knobs all anti-clockwise and CV inputs maxed out.\u00a0 At the maximum frequency, Shape has no effect on either module, and the wave form is a triangle.<\/p>\n

Indicators<\/h4>\n

A big difference is that Mini Slew uses blue LEDs and Function has red and green. (I’m not keen on blue LEDs.) In addition to the Cycle LED, Mini Slew has indicators to show CV Sum mode and Time Compensation mode.\u00a0 The same button selects these, a quick press for CV Sum and a long press for Time Compensation.\u00a0 Function has a bi-color LED to indicate EOR\/EOC, but Mini Slew does not have indicators for these outputs.<\/p>\n

Another big difference is the output level indicator.\u00a0 Function has a single bi-color LED, which is quite useful to show how far the output is going into negative voltage.\u00a0 Mini Slew opted for a 6-LED graph (with a red one at the top).\u00a0 It does not indicate the level of negative outputs.\u00a0 I’m with Make Noise on the output indicators.<\/p>\n

Summary<\/h3>\n

I’m wondering whether I will keep both of these, or maybe replace the Function with another Mini Slew.\u00a0 I like to have two of the same module.\u00a0 I don’t want two Functions.\u00a0 I’m undecided at this time whether to replace the Function with a second Mini Slew.\u00a0 Mini Slew has the edge with features, especially the Variable Output, and CV over Cycle and Shape.\u00a0 Not surprising, given the higher cost ($199 USD) over Function ($165).\u00a0 I don’t need the Hang input, since I have about a dozen sample and holds in the same rack already.\u00a0 But I’m not sure I’m ready to be blinded by two rows of glaring blue LEDs!\u00a0 Seems a small defect to put up with, though.<\/p>\n","protected":false},"excerpt":{"rendered":"

I am nuts about voltage-controlled slewing modules, which all stem from the Serge Positive and Negative Slews, and the Dual Universal Slope Generator (DUSG).\u00a0 In Eurorack I have Make Noise … Read More<\/a><\/p>\n","protected":false},"author":1,"featured_media":2440,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"categories":[161],"tags":[187],"class_list":["post-2439","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-eurorack","tag-slew-limiter"],"yoast_head":"\nMake Noise Function vs WMD SSF Mini Slew - Richard Brewster's Electronic Sounds<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/pugix.com\/synth\/make-noise-function-vs-wmd-ssf-mini-slew\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Make Noise Function vs WMD SSF Mini Slew - Richard Brewster's Electronic Sounds\" \/>\n<meta property=\"og:description\" content=\"I am nuts about voltage-controlled slewing modules, which all stem from the Serge Positive and Negative Slews, and the Dual Universal Slope Generator (DUSG).\u00a0 In Eurorack I have Make Noise ... Read More\" \/>\n<meta property=\"og:url\" content=\"https:\/\/pugix.com\/synth\/make-noise-function-vs-wmd-ssf-mini-slew\/\" \/>\n<meta property=\"og:site_name\" content=\"Richard Brewster's Electronic Sounds\" \/>\n<meta property=\"article:published_time\" content=\"2017-12-07T00:30:43+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2017-12-11T00:06:50+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/i2.wp.com\/pugix.com\/synth\/wp-content\/uploads\/2017\/12\/function-minislew.jpg?fit=403%2C640&ssl=1\" \/>\n\t<meta property=\"og:image:width\" content=\"403\" \/>\n\t<meta property=\"og:image:height\" content=\"640\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Richard\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Richard\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"6 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/pugix.com\\\/synth\\\/make-noise-function-vs-wmd-ssf-mini-slew\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/pugix.com\\\/synth\\\/make-noise-function-vs-wmd-ssf-mini-slew\\\/\"},\"author\":{\"name\":\"Richard\",\"@id\":\"https:\\\/\\\/pugix.com\\\/synth\\\/#\\\/schema\\\/person\\\/a4e9330e6bef4cd7d7d7a4c53c1ade75\"},\"headline\":\"Make Noise Function vs WMD SSF Mini Slew\",\"datePublished\":\"2017-12-07T00:30:43+00:00\",\"dateModified\":\"2017-12-11T00:06:50+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/pugix.com\\\/synth\\\/make-noise-function-vs-wmd-ssf-mini-slew\\\/\"},\"wordCount\":1135,\"commentCount\":7,\"publisher\":{\"@id\":\"https:\\\/\\\/pugix.com\\\/synth\\\/#\\\/schema\\\/person\\\/a4e9330e6bef4cd7d7d7a4c53c1ade75\"},\"image\":{\"@id\":\"https:\\\/\\\/pugix.com\\\/synth\\\/make-noise-function-vs-wmd-ssf-mini-slew\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/i0.wp.com\\\/pugix.com\\\/synth\\\/wp-content\\\/uploads\\\/2017\\\/12\\\/function-minislew.jpg?fit=403%2C640&ssl=1\",\"keywords\":[\"slew limiter\"],\"articleSection\":[\"Eurorack\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/pugix.com\\\/synth\\\/make-noise-function-vs-wmd-ssf-mini-slew\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/pugix.com\\\/synth\\\/make-noise-function-vs-wmd-ssf-mini-slew\\\/\",\"url\":\"https:\\\/\\\/pugix.com\\\/synth\\\/make-noise-function-vs-wmd-ssf-mini-slew\\\/\",\"name\":\"Make Noise Function vs WMD SSF Mini Slew - Richard Brewster's Electronic Sounds\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/pugix.com\\\/synth\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/pugix.com\\\/synth\\\/make-noise-function-vs-wmd-ssf-mini-slew\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/pugix.com\\\/synth\\\/make-noise-function-vs-wmd-ssf-mini-slew\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/i0.wp.com\\\/pugix.com\\\/synth\\\/wp-content\\\/uploads\\\/2017\\\/12\\\/function-minislew.jpg?fit=403%2C640&ssl=1\",\"datePublished\":\"2017-12-07T00:30:43+00:00\",\"dateModified\":\"2017-12-11T00:06:50+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/pugix.com\\\/synth\\\/make-noise-function-vs-wmd-ssf-mini-slew\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/pugix.com\\\/synth\\\/make-noise-function-vs-wmd-ssf-mini-slew\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/pugix.com\\\/synth\\\/make-noise-function-vs-wmd-ssf-mini-slew\\\/#primaryimage\",\"url\":\"https:\\\/\\\/i0.wp.com\\\/pugix.com\\\/synth\\\/wp-content\\\/uploads\\\/2017\\\/12\\\/function-minislew.jpg?fit=403%2C640&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i0.wp.com\\\/pugix.com\\\/synth\\\/wp-content\\\/uploads\\\/2017\\\/12\\\/function-minislew.jpg?fit=403%2C640&ssl=1\",\"width\":403,\"height\":640},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/pugix.com\\\/synth\\\/make-noise-function-vs-wmd-ssf-mini-slew\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/pugix.com\\\/synth\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Make Noise Function vs WMD SSF Mini Slew\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/pugix.com\\\/synth\\\/#website\",\"url\":\"https:\\\/\\\/pugix.com\\\/synth\\\/\",\"name\":\"Richard Brewster's Electronic Sounds\",\"description\":\"Modular and DIY electronic sounds\",\"publisher\":{\"@id\":\"https:\\\/\\\/pugix.com\\\/synth\\\/#\\\/schema\\\/person\\\/a4e9330e6bef4cd7d7d7a4c53c1ade75\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/pugix.com\\\/synth\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\\\/\\\/pugix.com\\\/synth\\\/#\\\/schema\\\/person\\\/a4e9330e6bef4cd7d7d7a4c53c1ade75\",\"name\":\"Richard\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/e92a10cf6d46004383f135e426ef1edcafde3502b6bbd263323910afca4868eb?s=96&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/e92a10cf6d46004383f135e426ef1edcafde3502b6bbd263323910afca4868eb?s=96&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/e92a10cf6d46004383f135e426ef1edcafde3502b6bbd263323910afca4868eb?s=96&r=g\",\"caption\":\"Richard\"},\"logo\":{\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/e92a10cf6d46004383f135e426ef1edcafde3502b6bbd263323910afca4868eb?s=96&r=g\"},\"sameAs\":[\"http:\\\/\\\/\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Make Noise Function vs WMD SSF Mini Slew - Richard Brewster's Electronic Sounds","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/pugix.com\/synth\/make-noise-function-vs-wmd-ssf-mini-slew\/","og_locale":"en_US","og_type":"article","og_title":"Make Noise Function vs WMD SSF Mini Slew - Richard Brewster's Electronic Sounds","og_description":"I am nuts about voltage-controlled slewing modules, which all stem from the Serge Positive and Negative Slews, and the Dual Universal Slope Generator (DUSG).\u00a0 In Eurorack I have Make Noise ... Read More","og_url":"https:\/\/pugix.com\/synth\/make-noise-function-vs-wmd-ssf-mini-slew\/","og_site_name":"Richard Brewster's Electronic Sounds","article_published_time":"2017-12-07T00:30:43+00:00","article_modified_time":"2017-12-11T00:06:50+00:00","og_image":[{"width":403,"height":640,"url":"https:\/\/i2.wp.com\/pugix.com\/synth\/wp-content\/uploads\/2017\/12\/function-minislew.jpg?fit=403%2C640&ssl=1","type":"image\/jpeg"}],"author":"Richard","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Richard","Est. reading time":"6 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/pugix.com\/synth\/make-noise-function-vs-wmd-ssf-mini-slew\/#article","isPartOf":{"@id":"https:\/\/pugix.com\/synth\/make-noise-function-vs-wmd-ssf-mini-slew\/"},"author":{"name":"Richard","@id":"https:\/\/pugix.com\/synth\/#\/schema\/person\/a4e9330e6bef4cd7d7d7a4c53c1ade75"},"headline":"Make Noise Function vs WMD SSF Mini Slew","datePublished":"2017-12-07T00:30:43+00:00","dateModified":"2017-12-11T00:06:50+00:00","mainEntityOfPage":{"@id":"https:\/\/pugix.com\/synth\/make-noise-function-vs-wmd-ssf-mini-slew\/"},"wordCount":1135,"commentCount":7,"publisher":{"@id":"https:\/\/pugix.com\/synth\/#\/schema\/person\/a4e9330e6bef4cd7d7d7a4c53c1ade75"},"image":{"@id":"https:\/\/pugix.com\/synth\/make-noise-function-vs-wmd-ssf-mini-slew\/#primaryimage"},"thumbnailUrl":"https:\/\/i0.wp.com\/pugix.com\/synth\/wp-content\/uploads\/2017\/12\/function-minislew.jpg?fit=403%2C640&ssl=1","keywords":["slew limiter"],"articleSection":["Eurorack"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/pugix.com\/synth\/make-noise-function-vs-wmd-ssf-mini-slew\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/pugix.com\/synth\/make-noise-function-vs-wmd-ssf-mini-slew\/","url":"https:\/\/pugix.com\/synth\/make-noise-function-vs-wmd-ssf-mini-slew\/","name":"Make Noise Function vs WMD SSF Mini Slew - Richard Brewster's Electronic Sounds","isPartOf":{"@id":"https:\/\/pugix.com\/synth\/#website"},"primaryImageOfPage":{"@id":"https:\/\/pugix.com\/synth\/make-noise-function-vs-wmd-ssf-mini-slew\/#primaryimage"},"image":{"@id":"https:\/\/pugix.com\/synth\/make-noise-function-vs-wmd-ssf-mini-slew\/#primaryimage"},"thumbnailUrl":"https:\/\/i0.wp.com\/pugix.com\/synth\/wp-content\/uploads\/2017\/12\/function-minislew.jpg?fit=403%2C640&ssl=1","datePublished":"2017-12-07T00:30:43+00:00","dateModified":"2017-12-11T00:06:50+00:00","breadcrumb":{"@id":"https:\/\/pugix.com\/synth\/make-noise-function-vs-wmd-ssf-mini-slew\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/pugix.com\/synth\/make-noise-function-vs-wmd-ssf-mini-slew\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/pugix.com\/synth\/make-noise-function-vs-wmd-ssf-mini-slew\/#primaryimage","url":"https:\/\/i0.wp.com\/pugix.com\/synth\/wp-content\/uploads\/2017\/12\/function-minislew.jpg?fit=403%2C640&ssl=1","contentUrl":"https:\/\/i0.wp.com\/pugix.com\/synth\/wp-content\/uploads\/2017\/12\/function-minislew.jpg?fit=403%2C640&ssl=1","width":403,"height":640},{"@type":"BreadcrumbList","@id":"https:\/\/pugix.com\/synth\/make-noise-function-vs-wmd-ssf-mini-slew\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/pugix.com\/synth\/"},{"@type":"ListItem","position":2,"name":"Make Noise Function vs WMD SSF Mini Slew"}]},{"@type":"WebSite","@id":"https:\/\/pugix.com\/synth\/#website","url":"https:\/\/pugix.com\/synth\/","name":"Richard Brewster's Electronic Sounds","description":"Modular and DIY electronic sounds","publisher":{"@id":"https:\/\/pugix.com\/synth\/#\/schema\/person\/a4e9330e6bef4cd7d7d7a4c53c1ade75"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/pugix.com\/synth\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":["Person","Organization"],"@id":"https:\/\/pugix.com\/synth\/#\/schema\/person\/a4e9330e6bef4cd7d7d7a4c53c1ade75","name":"Richard","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/e92a10cf6d46004383f135e426ef1edcafde3502b6bbd263323910afca4868eb?s=96&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/e92a10cf6d46004383f135e426ef1edcafde3502b6bbd263323910afca4868eb?s=96&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/e92a10cf6d46004383f135e426ef1edcafde3502b6bbd263323910afca4868eb?s=96&r=g","caption":"Richard"},"logo":{"@id":"https:\/\/secure.gravatar.com\/avatar\/e92a10cf6d46004383f135e426ef1edcafde3502b6bbd263323910afca4868eb?s=96&r=g"},"sameAs":["http:\/\/"]}]}},"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/pugix.com\/synth\/wp-content\/uploads\/2017\/12\/function-minislew.jpg?fit=403%2C640&ssl=1","jetpack_shortlink":"https:\/\/wp.me\/p1NMgI-Dl","jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/pugix.com\/synth\/wp-json\/wp\/v2\/posts\/2439","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/pugix.com\/synth\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/pugix.com\/synth\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/pugix.com\/synth\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/pugix.com\/synth\/wp-json\/wp\/v2\/comments?post=2439"}],"version-history":[{"count":0,"href":"https:\/\/pugix.com\/synth\/wp-json\/wp\/v2\/posts\/2439\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/pugix.com\/synth\/wp-json\/wp\/v2\/media\/2440"}],"wp:attachment":[{"href":"https:\/\/pugix.com\/synth\/wp-json\/wp\/v2\/media?parent=2439"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/pugix.com\/synth\/wp-json\/wp\/v2\/categories?post=2439"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/pugix.com\/synth\/wp-json\/wp\/v2\/tags?post=2439"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}