This patch uses mostly BugBrand modules.  The core idea was to make the two SYN2A VCOs cross-modulate each other.  A Serge Wave Multiplier from the CGS Serge panel was also used, and two Quantussy outputs were taken over for additional modulation.  During the recording I played with four pots, each of which controlled the depth of some modulation.  The SYN2B Quadrature Sine VCO was used as an LFO to control the Low Pass Gates with 90 degrees phase difference to get a panning effect, while simultaneously driving the SYN2BX Frequency Shifter.